Ferodo Brake pads from Pole Position USA, Ferodo pads Distributor

Narrow Your Search

Ferodo DS3000+03 Brake Pads

Please find above our selection of Ferodo brake pads listed by compound, if the Ferodo brake pads you are looking for are not listed, please call or email, we will be happy to get them for you.

As a general guide we recommend that you consider the following when making your material compound selection:

4WD Cars
same compound, front and rear
Rear Traction Cars
same compound, front and rear
Front Traction Cars
high friction level in the front axle (i.e. DS3000), lower friction level on the rear axle (i.e. DS2500, 4003)

Available Compounds

FERODO DS2500
With Ferodo race pads low- and high-speed braking efficiency, reduced stopping distances and consistent brake pedal feel are yours from first time - every time. Available for all leading high-performance European and Japanese vehicles.

Consistent coefficient of friction (0,42) at all temperatures
Low noise / low dusting
Long pad life
Kind on discs

This new generation of friction material is very low in compressibility ensuring a firm pedal, whilst still providing great life for both disc and pad. Combined with low wheel dusting and good noise characteristics this product is the brake pad for the driver who demands the ultimate in track day braking performance.

FERODO DS3000
DS3000 is the FERODO RACING compound that has set the braking standard from race one back in the 1998 season. DS3000 has contributed to countless wins and podium positions in many Touring car and GT championships around the world. In addition to its reduced bedding in time (approximately 50 percent quicker than other materials).

Very High coefficient of friction (0,54) at all speeds and temperatures
High initial bite
Predictability and control because of the unvarying torque output
Low off-brake drag

WARNING DS3000 IS NOT SUITABLE FOR ROAD USE
When using DS3000 on lighter racing cars lower brake pressures will be required to achieve the required deceleration. The graph relates the friction level of DS3000 to vehicle speed and to the temperature at the pad/disc interface.

FERODO 4003
4003 is a compound that was specifically developed for lighter cars (Formula 3, Formula Ford, Formula Opel, Formula Vauxhall, Formula Renault, Formula Campus) and Rally use. 4003 is the most commonly used pad worldwide in F3 championships.

High coefficient of friction (0,46) at all speeds and temperatures
Short bedding in time
Excellent initial bite
Predictable and reliable
Low drag/good release

4003 can also be used in the rear axle of front wheel drive racing cars (off road, asphalt, track)

FERODO DS1.11
Several brake pads on the market boast 'ceramic' technology. DS1.11 is the real thing. It is based upon a chemical family known as Siloxanes. Unlike carbon based materials, siloxane chains do not decompose at high temperatures and so DS1.11 keeps on working up to the highest temperatures a brake pad could ever see. That means it won't fade and has excellent life, the best in the Ferodo Racing range. Moreover the performance remains exactly the same throughout the pad's (long) life. It is formulated to provide a very flat friction profile at a medium/high level of friction. The pad compression is very low, always, and so pedal travel is short and consistent.

High coefficient of friction (0,50) at all speeds and temperatures
Excellent life of pad and disc
High initial bite
Predictability and control because of the unvarying torque output
Low off-brake drag/Excellent release
Unvarying performance throughout pad life
Firm pedal. Always

DS1.11 is recommended for use in A1GP, FIA GT, Touring Car, Formula cars and Group N

FERODO DS2.11
DS2.11 is the sister compound to DS1.11. It is based on the same siloxane technology and shares many of DS1.11's characteristics (unvarying performance, short pedal, excellent control) but has some additional features, notably it's extremely high bit and friction coefficient. Pad life is slightly lower than DS2.11. It is especially recommended for rally (WRC race proven), but is suitable for any other application where very high friction, bit and a rising torque profile are desired.

High coefficient of friction (max 0,62) at all speeds and temperatures
Very high initial bite
Excellent disc life and condition
No fade. Strong torque profile.
Good pad life
Low off-brake drag/Excellent release
Unvarying performance throughout pad life
Firm pedal. Always

DS2.11 is recommended for rally applications and sprint races.

FERODO DS3000 Endurance
While maintaining the essential characteristics of the DS3000 family, FERODO "Endurance" material has been formulated to provide extended pad/rotor life in events of three to six hours in length.

Exceptionally high coefficient of friction (0,46) at all speeds and temperatures
No fade
Predictability in all conditions
Good release

Whilst lower in overall friction level than DS3000 and 'Plus' DS3000 Endurance has the same excellent modulation as its sister compounds whilst maintaining an excellent bite.

FERODO DS3000 Plus 03
Developed by FERODO for severe braking conditions, where high friction is required at extreme temperatures. The material has an exceptionally high coefficient of friction (0.72) is whilst maintaining the same gently rising toque profile as DS3000 and great initial bite. This compound is used in Touring car, Stockcar, GT, Indy Light, Formula Nippon, Formula 3000, DTC and many other international Series.

Exceptionally high coefficient of friction (0,59) at all speeds and temperatures
No fade
Predictability in all conditions
Good release

When using DS3000plus03 on lighter racing cars, lower brake pressures will be required to achieve the required deceleration.

Pole Position USA

Ferodo Brake pads from Pole Position USA, Ferodo pads Distributor

Popular Products